Abstract The objective of the present investigation was to design, optimize and characterize the gastro retentive floating levofloxacin tablets and perform in-vivo evaluation using radiographic imaging. The floating tablets were prepared by using polymers i.e hydroxy propyl methyl cellulose (HPMC-K4M) and carbopol-940 individually and in combination by nonaquous granulation method. All the Formulations were evaluated for swelling index (S.I), floating behavior and in-vitro drug release kinetics. The compatibility study of levofloxacin with other polymers was investigated by FTIR, DSC, TGA and XRD. Results from FTIR and DSC revealed no chemical interaction amongst the formulation components. The optimized formulation (F11) showed floating lag time (FLT), total floating time (TFT) swelling index (S.I) of 60 sec, >16h and approximately 75 %, respectively. Moreover, F11 showed zero order levofloxacin release in simulated gastric fluid over the period of 6 h. X-ray studies showed that total buoyancy time was able to delay the gastric emptying of levofloxacin floating tablets in rabbits for more than 4 hours. In conclusion the optimized formulation (F11) can be used for the sustained delivery of levofloxacin for the treatment of peptic ulcer.

Abstract Pregabalin, a GABA analogue is used to treat epilepsy and neuropathic pain. The drug poses problems in analytical quantification when estimated at a shorter UV wavelength. The expensive and non-repetitive reported analytical methods necessitate the utility and development of an accurate, precise, repetitive, simple and highly sensitive colorimetric method for pregabalin in solution as well as sustained release mini matrices. Pregabalin (having primary amino group) was derivatized at alkaline pH of mixture with optimized ninhydrin solution at ambient temperature (25oC). The ninhydrin-pregabalin derivatized complex (Ruhemann’s Purple) was analyzed for drug concentration at absorption maximum (λmax) of 570nm. The linearity was observed in the concentration range of 5-150 µg/mL with coefficient of correlation, 0.998. The developed analytical method was validated according to ICH guidelines and proved to be highly sensitive (LOD 0.917µg/mL, LOQ 3.055µg/mL), with good inter-day as well as intra-day accuracy and precision as 4.65% and 3.75%, respectively. The proposed method was proved to be a simple, sensitive, precise and accurate for the estimation of the minute concentrations of pregabalin in pure form and the developed formulations. Results verified that the proposed method could determine pregabalin at the ambient temperature without requiring high temperatures used in the existing methods. It was concluded that developed method was easier and more suitable for analysis of pregabalin in quality control of commercial preparations.

The aim of present work was to investigate blends of Eudragit® NE 30D with Aquacoat® ECD using different ratios to eliminate curing effect associated with individual polymers. Propranolol HCl 10% w/w was layered onto sugar cores using 5% w/w HPMC as a binder. Drug-layered-cores were coated either with pure or blends of Aquacoat® ECD: Eudragit® NE 30D in a fluidized bed coater to obtain 20% w/w coating level. Talc 35% w/w was used as anti-tacking agent. The pellets were characterized for in vitro dissolution studies, morphology, water uptake-weight loss, osmolality and adhesion of coating after curing at 60 °C or 60 °C/75% RH for 24 h. The findings revealed that Aquacoat® ECD coated pellets showed curing effect due to further gradual coalescence of polymeric particles which resulted into better film formation upon curing. In contrast, the curing effect of Eudragit® NE 30D coated pellets was caused by decrease in adhesion of coatings after curing which provided entirely different swelling behavior of uncured (localized swelling) and cured (uniform swelling) pellets. The undesired curing effect of individual polymers was eliminated by using their blends in appropriate ratio.

RESUMO O presente estudo descreve o desenvolvimento de microcápsulas de teofilina pelo método sem adição de solvente e o efeito da adição de plastificante na microencapsulação. A liberação foi estudada em água destilada e os dados foram analisados por vários modelos matemáticos para determinação do mecanismo de liberação. As microcápsulas preparadas mostraram-se esféricas, livres de corrente e com mais de 80% de fármaco encapsulado. O polímero - ftalato de acetato de celulose e o plastificante - polietileno glicol - afetaram as propriedades das microcápsulas, incluindo a liberação do fármaco (tempo para liberação de 50% do fármaco, T50). A formulação com a maior proporção de polímero e sem plastificante (F3) se mostrou como a de liberação mais lenta, com T50 = 4,3 h, enquanto as formulações com menor proporção de polímero e 20% de plastificante (m/m) (F13 &14) apresentaram a liberação mais rápida do fármaco, com T50 de 1,2 h e 1,3 h, respectivamente. A liberação do fármaco para a maioria das formulações seguiu o modelo de Higuchi. Concluiu-se, dos resultados do presente estudo, que o ftalato do acetato de celulose afeta significativamente a liberação controlada do fármaco em água, enquanto que a adição de polietileno glicol aumenta ligeiramente a liberação do fármaco.

ABSTRACT The present study describes the development of theophylline microcapsules by a non-solvent addition method and the effect of plasticizer addition on microencapsulation. The release was studied in distilled water and the data were analysed by various mathematical models for determining the mechanism of release. Prepared microcapsules were found to be spherical, free flowing and having more than 80% entrapped drug. The polymer - cellulose acetate phthalate and plasticizer - polyethylene glycol was considered to be affecting the properties of microcapsules including drug release (time for 50% drug release, T50). The formulation with the highest proportion of polymer and without plasticizer (F3) showed the slowest release with T50 = 4.3 h, while the formulation with lower proportion of polymer and 20% (w/w) plasticizer (F13 &14) showed the fastest release of drug with T50 values of 1.2 h and 1.3 h, respectively. The drug release from most of the formulations was found to be following Higuchi model. It is concluded from the results of the present study that cellulose acetate phthalate significantly affects the sustained release of the drug in water, whereas the addition of polyethylene glycol slightly enhances the drug release.

Oxalis corniculata L. (creeping wood sorrel) is medicinally important member of family Oxalidaceae, and is distributed in the tropical and subtropical regions of the world. It has been used in different systems of traditional medications for different diseases. Corniculatin A, a new flavonoid glucoside, was isolated from the ethyl acetate soluble fraction of the whole plant along with luteolin, luteolin-7-O-β-D-glucoside and β-sitosterol-3-O-β-D-glucoside, This is the first report of these compounds from this species. Their structures were elucidated on the basis of spectral data including mass and 2D NMR experiments.